Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
So it just counts am i right?
I can see which side is the diode through the markings on top. How do i connect the photo diode on the other side? (it has 2 pins) should i like pull it high and then when ever the pathway is clear it connects the pulled high side to the PIC?
if(cPin == 0)
setpixel (global_Y++,global_X++);
He'd have a hard time overwhelming the hardware timer on a PIC with a mechanical wheel and Opto encoder. Most of the PIC frequency counter projects, which work up to 40-50Mhz, use the hardware timer and prescaler at much higher frequencies than AtomSoft will ever see from his encoder wheel.Depends on if the timer is synchronous or not, depends on a lot of things actually, like how fast you need to spin the wheel, what resolution you want and the frequency of the pic (if it's synchronous)