Thanks for answering, Brevor, The flip flop drives Q1 which controls R4 which controls M1, a power MOSFET which supplies current to my load, the LED is only a statis indicator. The load is a filter setup to power my amplifier for my head sets and a 12 - 5 volt LM317 for my GPS. The USB plug for my GPS used to be on 24/7, but if it got wet, it would corrode severely because of the voltage on it, so, I decided to make it so it could be turner off and I used a push button and flip flip to turn it of and practice using flip flips and P FETs. A toggle switch would be simpler, but not as fun. Also, the flip flop circuit is powered up 24/7 and the switch is pushed once or twice a day and sometime not for weeks.
Kinarfi