Tomorrow I will try to put something together on the bench. I only have 120 VAC available unless I run a 240 line but working with 120 VAC and at least a 1 KW load I should see something.
All of this is very nice but you have yet to define what sensor(s) you are using for voltage and current?
Ron
All of this is very nice but you have yet to define what sensor(s) you are using for voltage and current?
My power line is 240V AC 60Hz.
My power measuring device in between the line and load.
My load would be 0-10A which means 0-2400watt.
Ron