Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Controlling SRF02 Ultrasonic range finder using PIC18F4520

Status
Not open for further replies.

Ecappp

New Member
Specifications:
Microcontroller: PIC18F4520
Crystal: 4 MHz
Language: C Programming (not assembly codes)
Compiler: MPLAB C18 C Compiler (MCC18)

Hi everyone. I was thinking of using the PIC18F4520 to control and use the SRF02 (Ultrasonic range finder). However, this is new to me and I totally have no clue on how to use it and start on programming using PIC18F4520. I have tried surfing the net to look for ideas to use it but they are all either not using PIC18F4520 or by other methods.

Can anyone please give me some guidance on how to start, in terms of the programming, for controlling the SRF02 using PIC18F4520?

Thanks.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top