Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Controlling LED Piranha with PWM controllers

Status
Not open for further replies.

aquarius

New Member
In my project I need to control intensity of 8 LED Piranha by using following components(see an attached file):
- LED RGB Controller ( simply changes combination of R,G,B colors)
- OPTO22 ODC15 Solid state relays module
- 8 independent PWM controllers (work from software and change output voltage from 0 to 12VDC)
- 8 LED RGB Piranha 12VDC, 25mA, with resistors
My point is to make dimmable 8 LED Piranha while the LED Controller changes colors. Each LED performs according to the PWM Controller output voltage.
I've already made and tested only one LED. Works perfect.
Don't know where to connect other 7 negative outputs from PWM's.
Do I have to have 7 more OPTO22 or there is another solution?
Need help.
Thank you.
 

Attachments

  • LED Controller Circuit_FUN 1.pdf
    58.2 KB · Views: 167
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top