Control a knob on a Honeywell fan via ESP8266

Status
Not open for further replies.
S

StealthRT

Member
Hey all I am wondering what all I would need in order to control this knob on my Honeywell 2-in 1 Air Circulator Fan, HT-9700
















I am wanting to use a ESP8266 in order to control it via wifi. I know how to do it on that side but I am unsure what's available for the other side (the knob) in order to "turn" the knob or hook into the knob wires.
 
Last edited:
OK So here it is:

BROWN wire = Low fan speed
RED wire = HIGH fan speed
BLACK wire = HOT

With the black prob on BLACK and the red prob on RED with the fan ON/HIGH I get: 09.9
With the black prob on BLACK and the red prob on BROWN with the fan ON/LOW I get: 00.0
With the black prob on BLACK and the red prob on RED with the fan OFF/OFF I get: 124.4
With the black prob on BLACK and the red prob on BROWN with the fan OFF/OFF I get: 124.4

Note I am using the AC mode on my multi meter that looks like this:
 
Status
Not open for further replies.

Similar threads

I
  • Question
Can I use BP2857 constant current LED driver IC with a PWM-controlled MOSFET for dimming and turning the lights on or off with an ESP8266/Arduino?
Replies
5
Views
2K
Tony Stewart
G
  • Question
A/D converter reference voltage on negative terminal
Replies
16
Views
495
ZipZapOuch
N
  • Question
How to bypass a touch switch on a humidifier?
Replies
14
Views
3K
nicofiaba
N
W
AC Crossflow/Barrel Fan Speed Control
Replies
3
Views
1K
Western
W
Baomain Delay Control Relay (Delay ON / Delay OFF) Usage
Replies
4
Views
453
ThomsCircuit
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…