consumptio of power

A

ashokkumar8226

New Member

• Mar 26, 2009

• #1

Hi,

i have preampligfier which need input power of 24v dc then what will be the consumption power of the equipment per hour.

 

Sceadwian

Banned

• Mar 26, 2009

• #2

You can't calculate power with only voltage, you'd need to know the RMS current draw of the pre-amp under the conditions you're going to be using it under.

 

Nigel Goodwin

Super Moderator

Most Helpful Member

• Mar 26, 2009

• #3

As he specified 24V DC why mentioin RMS?.

 

Sceadwian

Banned

• Mar 26, 2009

• #4

He's feeding it 24V DC, but I doubt the current draw is going to be static, it's going to use more or less power depending on what the applied signal is. I don't know how variable this is in a pre-amp so I just said RMS current to be on the safe side. If he tests it on a bench without a load and thinks he's going to get X power over the long haul and it's current use doubles with an applied load in his app he's gonna be surprised.

 

Last edited: Mar 26, 2009

A

ashokkumar8226

New Member

• Apr 3, 2009

• #5

how to calculate dc power consumption

24v dc is input to the peramplifier what is RMS, i mean to say i have different equipments which have different consumption like

1: projector have 300w
2: amplifier have 200w
3: pre amplifier have 24v DC
4: vga distribution have 12v DC

if projector has 300w consumption it will take load of 1.3 amps and 300w X 1hour is 300wh consumption then in dc how the consumption will be calculated

 

Nigel Goodwin

Super Moderator

Most Helpful Member

• Apr 3, 2009

• #6

As you've already been told, you can't calculate it from just the voltage, there's not enough information.

 

mvs sarma

Well-Known Member

• Apr 3, 2009

• #7

Ashokkumar jee,
you are not clear in what is the doubt you have. Please plan and make a proper presentation so that a possible answer could be given. If a picture can speak THOUSAND words, why not upload a block schematic of the equipment under question in support of your query?