I am beginner student of electronics.....How to obtain constant dc output voltage between 5 to 6volt?????by converting frequency varying between 0-10kHz using frequency to voltage converter...also tell me is there monostable multivibrator in circuit???....i have attached figure....pls suggest me modifications in circuit as per my requirment....can i modify switch which will be closed automatically if the output is not in specified range???.....
Your requirements are confusing because you state you want a constant dc output, and then you state you want a frequency to voltage output. Which is it?
He wants a F to V converter, which would output a voltage in the range of 5 volts when 10 Khz are applied. And he is asking what component changes are required in the monostable and outputs filters to do so.
@ scmitt trigger,yes u r right....in my above fig,output varies between 0 to Vcc(dc)...i want output in range of 5-6 Volt..for range 0 to 10khz input...pls suggest me changes....
ok,thank u for ur circuit.....i am trying ur circuit...
i found this another attached circuit on net.....pls tell me about modifications in this circuit....if i want to obtain 5-6 volts output,which parameters r required to change....also is there any formula relating output voltage with other parameters in circuit?????9 volts battery is availble to me...if i connect that battery to Vs in fig.....which parameters shud i change?????
THANK U...very much for ur circuit.....now at last ;pls clear 1 doubt,will the above circuit give me constant output between 5-6 volts?????for frequency varying between 20hz-20khz????if not pls suggest me formula relating output voltage in amplifier with other parameters such as resistors or capacitors....thanks in advance....
THANK U...very much for ur circuit.....now at last ;pls clear 1 doubt,will the above circuit give me constant output between 5-6 volts?????for frequency varying between 20hz-20khz????if not pls suggest me formula relating output voltage in amplifier with other parameters such as resistors or capacitors....thanks in advance....
ok,sorry my requirment is for 0-10khz.....
1)pls suggest me formula relating output voltage in amplifier with other parameters such as resistors or capacitors...