Do you always ask so many questions
Only when the original question is poorly worded and lacks many details.
If that was required I would have asked.
Really? You didn't mention the required 400 mA (!!!) output current, the latching output enable, the frequency accuracy, the output waveform shape, or the size restriction...
I assumed the five-vs-six was a simple mistake, but your response does nothing to clear it up. Is it five or six?
"Each output" implies five (or six) outputs. But "the same bank of LEDs" implies one output. How many oscillating outputs do you require?
Is this a stepped PWM (constant pulse width/variable frequency) brightness circuit?
"Ratio is 1:1." Coming after a list of frequencies, I don't know what ratio you are talking about. Do you mean the output pulse width ratio, as in 50% duty cycle?
The circuit in post #12 divides the input clock by 1, 2, 3, 4, 5, not 1, 2, 4, 8, 16.
73 is a prime number, so the odds of finding an off-the-shelf high frequency crystal for the timebase is very low. Do you have a frequency counter to set up an oscillator?
ak