L lowpull New Member Sep 29, 2009 #1 I have a hand held laser rangefinder that displays the distance inside (on a tiny LCD), while looking through the optics. I'd like to have it display on some larger external LCD display, so that I don't have to look through it to read the data. Seems like I would have to "hijack" this existing signal and work out the interface to some other display. I am going to crack open the case with my partner and have a look see. Any suggestions?
I have a hand held laser rangefinder that displays the distance inside (on a tiny LCD), while looking through the optics. I'd like to have it display on some larger external LCD display, so that I don't have to look through it to read the data. Seems like I would have to "hijack" this existing signal and work out the interface to some other display. I am going to crack open the case with my partner and have a look see. Any suggestions?
birdman0_o Active Member Sep 29, 2009 #2 Is it a character LCD? Do you have any part numbers or pictures for us?
C codywookman New Member Sep 29, 2009 #3 do you know what the controller that powers the LCD display is? (part #)
L lowpull New Member Sep 30, 2009 #4 Check out Bushnell Yardage Pro for display examples. I have not cracked the case open yet. But will look for controller P/N.
Check out Bushnell Yardage Pro for display examples. I have not cracked the case open yet. But will look for controller P/N.
Mr RB Well-Known Member Sep 30, 2009 #5 The Bushnell "tech talk rangefinders" page is pretty good, sounds like a laser TOF with LCD readout; **broken link removed**
The Bushnell "tech talk rangefinders" page is pretty good, sounds like a laser TOF with LCD readout; **broken link removed**