Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

can anyone tell me how to generate hex file using MPlab

Status
Not open for further replies.
You have to look at the effor file and fix each error. The file will not compile until all the errors are fixed.
 
i fix the error and it converting it :D:D
btw , i will post the video soon :D:D:D

add this line near the 'include at the header'
errorlevel -302 , -207 ; suppress Warning messages,,, the Error messages will still be shown

EDIT: message meaning
207 Found label after column 1.
A label was found after column one, which is often due to a misspelled opcode
..
302 Register in operand not in bank 0. Ensure that bank bits are correct.
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top