can anyone tell me how to generate hex file using MPlab

Transistorman

Member

• Jul 20, 2010

• #1

if anyone can tell me ?

 

C

colin55

Well-Known Member

• Jul 20, 2010

• #2

Use MPASM

 

Transistorman

Member

• Jul 20, 2010

• #3

Hi colin .
Where did i can get MPASM ?

 

C

colin55

Well-Known Member

• Jul 20, 2010

• #4

http://www.talkingelectronics.com/projects/Elektor/files/MPASMWIN.rar

 

Transistorman

Member

• Jul 20, 2010

• #5

can you tell me how to use it
the software has too many setting

 

C

colin55

Well-Known Member

• Jul 20, 2010

• #6

Simply compile your .asm file and you will get 4 different files .cod .hex etc

 

Transistorman

Member

• Jul 20, 2010

• #7

i always get this error
**broken link removed**

 

Last edited: Jul 20, 2010

Nigel Goodwin

Super Moderator

Most Helpful Member

• Jul 20, 2010

• #8

Transistorman said:

i always get this error
**broken link removed**

Click to expand...

So why not pay attention to it?.

Move the file to a shorter path - stick it in C:/ASM or something like that.

 

Transistorman

Member

• Jul 20, 2010

• #9

Nigel Goodwin said:

So why not pay attention to it?.

Move the file to a shorter path - stick it in C:/ASM or something like that.

Click to expand...

sorry , i not to good at reading english

 

Transistorman

Member

• Jul 20, 2010

• #10

where i can get my hex file ??
**broken link removed**
i only get the XRF , ERR , and C code

 

Last edited: Jul 20, 2010

C

colin55

Well-Known Member

• Jul 20, 2010

• #11

You have to look at the effor file and fix each error. The file will not compile until all the errors are fixed.

 

ericgibbs

Well-Known Member

Most Helpful Member

• Jul 20, 2010

• #12

Transistorman said:

if anyone can tell me ?

Click to expand...

hi T,
Post your asm file, all of it.

 

Transistorman

Member

• Jul 20, 2010

• #13

i fix the error and it converting it
btw , i will post the video soon

 

ericgibbs

Well-Known Member

Most Helpful Member

• Jul 20, 2010

• #14

Transistorman said:

i fix the error and it converting it
btw , i will post the video soon

Click to expand...

add this line near the 'include at the header'
errorlevel -302 , -207 ; suppress Warning messages,,, the Error messages will still be shown

EDIT: message meaning
207 Found label after column 1.
A label was found after column one, which is often due to a misspelled opcode
..
302 Register in operand not in bank 0. Ensure that bank bits are correct.

 

Last edited: Jul 20, 2010