Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Buzzer Question

Status
Not open for further replies.

daredavel

New Member
can can someone teach me how to generate buzzer alarm ni pic16f877a? using peizo buzzer 5v.. just a simple alarm will do.. Can you share a sample assembly codes guys? that would be great! thank u!
 
Here's one way you might do it.

Regards, Mike

Code:
        radix   dec

spkr    equ     1               ; spkr on RB0

;--< variables >---------------------------------------------------

delayhi equ     0x20            ; DelayCy() subsystem
beepctr equ     0x21            ; beep subroutine

;--< macros >------------------------------------------------------

clock   equ     4               ; 4, 8, 12, 16, 20 (MHz), etc.
usecs   equ     clock/4         ; cycles/microsecond multiplier
msecs   equ     clock/4*1000    ; cycles/millisecond multiplier

DelayCy macro   delay           ; 11..327690 cycle range
        movlw   high((delay-11)/5)+1
        movwf   delayhi
        movlw   low ((delay-11)/5)
        call    uDelay-((delay-11)%5)
        endm

;******************************************************************
;   Main program                                                  *
;******************************************************************
        org     0x000
v_reset
        call    beep            ; beep                            |B0
        DelayCy(100*msecs)      ; delay 1/10th second             |B0
        goto    v_reset         ; loop forever                    |B0

;******************************************************************
;  beep (32-msec 500-Hz)                                          *
;******************************************************************
beep
        movlw   32              ;                                 |B0
        movwf   beepctr         ; beepctr = 32                    |B0
loop
        movf    PORTB,W         ;                                 |B0
        xorlw   1<<spkr         ;                                 |B0
        movwf   PORTB           ; toggle speaker pin
        DelayCy(1*msecs-6)      ; delay 1-msec minus 6 cycles     |B0
        decfsz  beepctr,F       ; done? yes, skip, else           |B0
        goto    loop            ;                                 |B0
        return                  ;                                 |B0

;******************************************************************
;  K8LH DelayCy() subsystem 16-bit uDelay(11..327690 cycle) sub'  *
;******************************************************************
        nop                     ; entry for (delay-11)%5 == 4     |B0
        nop                     ; entry for (delay-11)%5 == 3     |B0
        nop                     ; entry for (delay-11)%5 == 2     |B0
        nop                     ; entry for (delay-11)%5 == 1     |B0
uDelay  addlw   -1              ; subtract 5 cycle loop time      |B0
        skpc                    ; borrow? no, skip, else          |B0
        decfsz  delayhi,F       ; done?  yes, skip, else          |B0
        goto    uDelay          ; do another loop                 |B0
        return                  ;                                 |B0

;******************************************************************
        end
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top