i start to build a double baby 10 step sequencer. how can i connecte the two 4017? i put the cv out of the first in the clock of the second? what exactly are the pins reset and disable? how can i use them? also how can i put a potentiometer to change tempo?
Don't you read the datasheet??
The datasheet for the 4017 shows how to cascade them for more outputs.
The datasheet also describes how all the pins are used.
I think the OP wants to cascade them so that each of the 20 outputs go high in sequence which (to my knowledge) isn't possible. Cascading so that the outputs count 00 to 99 can be done.
I think the OP wants to cascade them so that each of the 20 outputs go high in sequence which (to my knowledge) isn't possible. Cascading so that the outputs count 00 to 99 can be done.
Interesting! I never noticed it before. Looks like it just divides the input frequency by 5. 0-4 output it's high...5-9 output it's low. Or you need a rising edge out as output 9 goes low.