Does anyone know anything about sewing machines?, my wife's Brother S-2125 has died, completely dead, no light or anything.
I haven't even checked the fuse in the plug yet, but I was wondering if anyone knows how they 'work' - the mains lead goes to the foot switch, which has a three pin lead in to the machine - is it just a simple triac speed controller?. Presumably feeding neutral, live (for the bulb), and the third pin variable power for the motor?.
Just thought I'd ask, in case anyone has already 'been there'
Sewing machines motors and controllers cover the gamut from Universal motor and variable resistor peddle, to DC motor with either SCR or PWM drive, and 3ph motor with VFD type.
A little digging and 'reverse Engineering may be needed.
Or post a Model No.
Max.
Need to clean my specs again **broken link removed**
The parts list shows 120v 60Hz motor so most likely a Universal motor, if so, there should be minimum electronics, if any.
Max.
It was easier to ask first rather than walk down two flights of stairs with my meter
Someone might have said "that's a common problem and it needs 'x'" - and I could have taken 'x' down as well, it potentially saves trips up and down stairs.
Someone might have said "that's a common problem and it needs 'x'" - and I could have taken 'x' down as well, it potentially saves trips up and down stairs.