Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
battery type is SLA and current is 0.5A.
battery capacity is 10ah and i want to stop charging in 13.8 volt but i dont know how long after reaching the voltage to 13.8 battery chrging must turn off, what is your recommend?Most SLA chargers use battery terminal voltage (during charging) to control the charging algorithm.
What is the AH capacity of your battery?
What voltage limit are you planning to use?
How long after reaching the voltage limit will you turn off the charger?
Detecting the battery temperature wouldn't hurt either.
thanks
do you have any reference about charging SLA batteries.
i want to use sloar panel to charge the battery that it's open circuit volatge is 21 volt .the voltage will rise as the battery accumulates charge. Upon reaching 13.7V, the supply will voltage limit, and the charging current will begin to drop.
So are you planning to use the AVR as the "brains", or not?
i have a new idea :charging battery with solar panel (that have 21 volt open circuit) until battery voltage reach to the 13.7 and then stop charging .what is your opinion?