when i broke open the AA battery assembly it had four prongs.
two were blank with no wires leading from them and the other two
had 1 wire each,a red and black.
lets pretend this example is my AA batt assembly.
+ (pos) --[______] <-- prong empty | blank | no wires
[ ]
- (neg) --[______] <--prong empty | blank | no wires
i doubt the 4 C cell batts are wired any differently, but if it will
really help i can crack the ****** open and see for sure.
im just not sure what the diff between a 6v and two different -/+ 3V
wall warts would be. wouldnt it be possible to wire it like the AA hookup?
unless your saying that its possible two batts could be wired together,
leaving the remaining two C cell batts to be wired up the same way.
as if we were working with the two AA's all over again, just in C cell.
regardless it would be a big help to lay out each of these possible applications. you are both awesome Duffy and dknguyen.
i'll post pics when its done just so yall can see watta big help ya been