Average datalog every 5 seconds.

// Some further examples of setting timer unit
// No. 4 - Minimum code to count pulses ina 5 second period and display
// I.T. - 25/10/04
#include <stdio.h>
/* Heart Rate Monitor - Assignment 1 2001 I.T. 25/10/01 */


void timer(void);
void calc(void);/* Function Prototype for ISR */


unsigned char calcnow,count,enable;									/* GLOBAL VARIABLES FOR RETURNING VALUES*/
unsigned int data,data1,secs,ticks,ticks1,ticks2,mins,hours,calcn,cycle,pulse,bpm,interval,rollovers,rollovers2,rollovers1;
float freq;

unsigned long int result;



unsigned char *padr,*paddr,*tflg2,*pactl,*tmsk2,*tflg1,*tctl2,*tmsk1;
unsigned int *tcnt,*tic1;

void main()
{
	int log[2][100],avrate=0,eventno=0;
unsigned char selection=0,run=1;
calcnow=0;
padr=(unsigned char*)0x0;
paddr=(unsigned char*)0x1;
tctl2=(unsigned char*)0x21;
tflg1=(unsigned char*)0x23;
tmsk2=(unsigned char*)0x24;
tflg2=(unsigned char*)0x25;
pactl=(unsigned char*)0x26;
tcnt= (unsigned int*)0x0e;
tic1= (unsigned int*)0x10;
tmsk1=( unsigned char*)0x22;


*paddr=0x00;													/*Port A all inputs*/
*pactl=0x03;													/*Set prescaler to maximum*/
*tctl2=0xaa;													 /* One edge capture on all TICs*/
*tflg1=0x04;														/* Clear TIC1 Flag*/
*tmsk2=0x40;														/*Enable RTI interrupt*/
*tflg2=0x40;
*tmsk1=0x04;
for(;;)
	
{
	/*	
	//	printf("interval was %u Frequency is %5.0f \n\r",result,freq); 
	
*/
	
		if (calcnow!=0 && run ==1)
	{
	eventno++;
	calcnow=0;		
													


	
	
			result=((rollovers1-rollovers2)-1)*65536+interval ;
			freq=2.0e6/(float)result;
			cycle=(rollovers1-rollovers2);
			//pulse=(data-data1)+(ticks-ticks1)*65536;

			bpm=freq*60;
			printf("Interval was %u Frequency is: %4.2f Cycle:%i bpm=%3i\n\r ",interval,freq,cycle,bpm) ;
		//	printf("Data:%i Data1:%i ticks1:%i ticks:%i\n\n\r",data,data1,ticks1,ticks);
			printf("Data:%i Data1:%i rollovers1:%i rollovers2:%i\n\n\r",data,data1,rollovers1,rollovers2);
			
			
			count=1;
			enable=0;
		
		
		
	}
}
}



@interrupt void timer(void)
{

ticks++;
rollovers++;
if (ticks==30)
{
	ticks=0;
	secs++;
	printf("%60Time: %2i:%2i:%2i\n\n",hours,mins,secs);
	calcnow=1;
	
	
}



if (secs==60)
{
	secs=0;
	mins++;
}
if (mins==60)
{
	mins=0;
	hours++;
}
if (hours==24)
{
	hours=0;
}

*tflg2=0x40;														
}

@interrupt void calc(void)
{
/* Copy tic1 to data and data1 */	
//	printf("asdas");
//	count++ ;
	
	
		data1=data;
		data=*tic1;
		interval=(data-data1);

		

		rollovers2=rollovers1;
		rollovers1=rollovers;