Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Analog One-Shot

Status
Not open for further replies.
I resimulated the circuit with 1k for the buzzer instead of 100K. It works very nicely. Now to dig up an SCR.

I choose the 1uF and 100K values because with the 100K resistor substituted for the buzzer the circuit wasn't working. I didn't know that a) the circuit was bench tested, and b) the required resistance to substitute for the sonalert; which turns out was too high to make the circuit work. In short I butchered your bench testing because my sonalert-resistor substitution was too high in the simulation.
any small SCR would do , even in a TO92 package.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top