1) The transmitter must have three buttons and when i click on each button a certain signal is generated and then transmitted.
2) The receiver should contain 3 leds when button one on transmitter is pressed the led1 on receiver must light.
Anyone can help in construction of such circuit, pleas help i needed it as soon as possible, all ideas and suggestions are welcomed, thanks in advance :?:
There are AM Tx / Rx modules that you can buy ready made which are not very expensive - depending on which country you live in, they should be licensed exempt.
One way of sending three separate signals (One for each L.E.D colour) is by using an encoder chip with the transmitter (Such as the Holtek series HT...) and designating a code for each L.E.D colour. On the receiver, you will need three decoders - one for each L.ED colour