Check the many previous posts here about it, or consult my tutorials - the 8x8 LED matrix one uses two long tables (one for the font, and one for the text string).
Hi Nigel thanks for your reply.I went through your codes that's what I was finding.
Code:
ASCII_Table movlw High(Table) ;perform read from long table
addwf offsetH, W
movwf PCLATH
movlw Low(Table)
addwf offsetL, w
btfsc STATUS , C
incf PCLATH, f
MOVWF PCL
Table retlw 00h ; Page 0x05
retlw .1
----
----
----
----
----
----
---- ; Page 0x06
----
----
----
I have a question.
Can I call the above subroutine in anywhere in PIC memory below 2K?
Ex;I'm calling the above subroutine from page 1.But the above subroutine in page5.Also half of the contents of the lengthy table is in another page (page6).