Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

4558D amp ??

Status
Not open for further replies.

kimbear

Member
I have a very basic 455D amp circuit, pretty much built from the spec sheet, its about as simple as you can get. Can the output of the 4558D go directly into the AUX input of a recorder??
Thanks a lot guys for your response, I appreciate it, in advance.
 
Assuming the signal level is correct, then yes - depending on the exact circuit in use, and the exact circuit of the Aux input.

It's just a bog standard dual opamp.
 
1. Schematic?

2. Power source(s) for the circuit?

3. What type of recorder? Specifically, professional or consumer grade?

The signal levels for a "0 Vu" input are quite different. Depending on the power supply voltage(s), the output signal could be clipped.

ak
 
a 4558 being a dual 741, you might have some background hiss... use a TL072 or LF353 instead...
 
A 1458 is a dual lousy old 741 opamp.
The 4558 dual opamp was developed 47 years ago as an improved 741 dual opamp. It has a fairly low noise level and a 30kHz output at a gain up to only 100 times.
 
Status
Not open for further replies.

Latest threads

Back
Top