After looking at the datasheets for 4543 & 4553 I think I might stick with the 4026 chip. The datasheet for the 4026,
https://www.electro-tech-online.com/custompdfs/2011/05/cd4026b.pdf, states that it has schmitt triggered inputs so I don't need to add another circuit. It has both the counter and 7-segment driver built into one along with outputting a low mA so I don't need any resistors between the chip and the 7-segment. I understand I still will need three separate 7-segments and three separate 4026 chips but that should be it; no extra resistors or other items.