I would like to know why after E is printed in the 2nd line completely, after some time why it starts to print on first line too.
Simulation: Ive used the Proteus Version 8.16
Compiler: CCS Compiler 5.008
P.S Im a new joiner to this forum. So if there are any mistakes, please let me know. Ill...
Hello,
This is my dirt bike speedometer (Suzuki DR 250R 98), I noticed the first two digits of the odometer faded, so my initial thought was a bad connection I thoroughly cleaned the zebra connections but the issue wasn't resolved so I tried to fix it by changing polarizer films, I didn't...
Hey there, this is my first time posting here. I definitely appreciate any and all help.
I've got a TI MSP430G2552 microcontroller that I am using, leftover from a class last semester. I also have a 16x2 LCD with the HD44780 controller/driver. I'm building the library and C files inside of Code...
I have a question, I copied the program into Raspberry Pi pico when I was working on the project of thermal printer parking system, after that I tried to copy other programs but they failed, is it because the pico board can only copy one program?
I am working with 320x240 LCD having controller RA8835 (compatible with SED1335) interfaced with ATmega128A. It's working ok while I try to display text in by default font but I am not able to display different fonts and images. attaching project below.
It would be great if to have help...
Hi all,
I am programming a 5 inch display bought in buydisplay (https://www.buydisplay.com/5-inch-tft-lcd-module-800x480-display-controller-i2c-serial-spi) which has a RA8875 chip and a capacitive touch panel (both use the I2C protocol), and even though I have been able to write text for...
How do I interface an Arduino MEGA to this 16x1 LCD (datasheet: **broken link removed** Available from FocusLCDS.com
I'd like to use I2C, if possible?
What other ICs do I need to make it work?
Thanks!
I have a small drone camera that I'm trying to link to a set of LCD glasses, thus creating night vision glasses. Only downside is that I'm a complete novice to electronics, and have no idea how to attach the two.
Images: https://imgur.com/a/aIFPS
Any help with this is greatly appreciated.
Cheers,
Recently I've bought a used Philips 220e which itself looks in mint condition, but I haven't checked the monitor before I bought it. So, when I plugged it in, all I've got was a black screen with somewhat distinctive sound of something rapidly charging and discharging (possibly the capacitors)...
I am currently working with PIC microcontroller 16F877A. I am only allowed to work in Assembly (nothing high level like C). I have a number saved in a register. I need to display it on the LCD.
I was thinking of separating the digits, then sending the ASCII value of each digit. The only issue...
https://www.mpja.com/LCD-Display-240-X-128-Graphic-with-Backlight/productinfo/31003+OP/
I just purchased this LCD display and was wondering what the extra red/black wire is for. You can download the datasheet from the above link. I'm also wondering what the data sheet means by "# Has built-in...