AtomSoft
Well-Known Member
Hey everyone, im embarking on yet another VGA trial... but this time using a ARM.. also i i read that VGA signal can be 0.7v-1v so i devised a voltage divider using:
VOUT = R1/(R1+R2)
So i got R1 as 100 and R2 as 240.. it gives me a output of .97v
You think using a Voltage Divider for this purpose is ok?
VOUT = R1/(R1+R2)
So i got R1 as 100 and R2 as 240.. it gives me a output of .97v
You think using a Voltage Divider for this purpose is ok?
Last edited: