Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Iv been told that when operating transistor as constant switching devices, it is more efficient to operate them in saturation mode. it that right. Can any one tell me why that is?
No, it does not apply. THat is a BJT transistor. The two types of BJTs are NPN and PNP. The two types of MOSFETs are NMOS and PMOS. Saturation is unfortunately used for both devices but they are referring to completely different things.
[EDIT:] I think I may be mistaken. Although saturation means different operating modes for both types of transistors, they both happen to be the most efficient when being used as a digital switch. **broken link removed** **broken link removed**
I kind of forget how BJTs work so...yeah...read what I write critically.
dknguyen - you had it right the first time. Saturation in mosfets refers to constant current mode - where Id is independent of Vds. Triode region is the one you want when using a mosfet as a power switch - if you run through the equation and assume that Vds is very close to 0, you end up with Id ~= k*Vds which looks a lot like Ohm's law.
Oh, so it is triode for MOSFETs and saturation for BJTs? I tend to get confused with the region where you switch between it's two extremes when using it as a switch and when you push the transistor way beyond the "on" threshold so it can't switch off as fast. Bleh, gotta review.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.