Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
The attached circuit diagram and hex file I received from my friend. It works well with the Proteus. But when practically created, it does not work. Anyone can guess what is the reason for it. I have only the circuit and the hex file.
I can't comment on the hex file but the schematic may have some problems.
There are no resistors to limit the current to the LEDs.
Three LEDs are fed per NPN transistor so the one with the lowest Vf will light and the other two may not.
Each port pin has to sink the LED current - can the ports handle a total of 24*LED current?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.