im doing PIC programming. my task is to capture the clock pulse for one period in order for me to do speed controller. i have found a source code for this speed controller, but my problem is need to C language. Could somebody help me to convert it??Tx
Below is the source code:
Device = 16F877
Xtal = 20
Dim Result as DWord
LCD_DTPIN = PORTB.4 ' Setup the LCD
LCD_RSPIN = PORTB.2 '
LCD_ENPIN = PORTB.3 '
LCD_INTERFACE = 4 '
LCD_LINES = 2 '
LCD_TYPE = 0 '
All_Digital = True ' Make all pins Digital I/O's
While 1 = 1
Result = COUNTER PORTA.0, 100 ' Count how many pulses in 100mS
Result = Result * 10 * 60 ' Scale To RPM
Print at 1, 1, "RPM = ", DEC8 Result ' Display on the LCD
Wend ' Loop for ever
Below is the source code:
Device = 16F877
Xtal = 20
Dim Result as DWord
LCD_DTPIN = PORTB.4 ' Setup the LCD
LCD_RSPIN = PORTB.2 '
LCD_ENPIN = PORTB.3 '
LCD_INTERFACE = 4 '
LCD_LINES = 2 '
LCD_TYPE = 0 '
All_Digital = True ' Make all pins Digital I/O's
While 1 = 1
Result = COUNTER PORTA.0, 100 ' Count how many pulses in 100mS
Result = Result * 10 * 60 ' Scale To RPM
Print at 1, 1, "RPM = ", DEC8 Result ' Display on the LCD
Wend ' Loop for ever
