ikalogic
Member
hi, i dont know to use the pins RA4 and RB0 on the pic16f84a, those are special finction pins, but i want ot use them normally like other i/o pins...
i used to declare then as inputs and outputs int he ASM like this:
movlw 00000000;
and
movwf PORTB;
but it didin't work, meaning i couldn't send any outputs... was this an error i made somewhere else, meaning the previous piece of code i allreight OR there is something special i need to do (declare or something) to enable the RB0 and RA4
i am using the Microchips' MPLAB IDE...
thx
i used to declare then as inputs and outputs int he ASM like this:
movlw 00000000;
and
movwf PORTB;
but it didin't work, meaning i couldn't send any outputs... was this an error i made somewhere else, meaning the previous piece of code i allreight OR there is something special i need to do (declare or something) to enable the RB0 and RA4
i am using the Microchips' MPLAB IDE...
thx