Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Old-Style "Edge Lit" Bulb - Does anything like this still exist?

For The Popcorn

Well-Known Member
Most Helpful Member
Way back when (the 70s) I bought an old aviation switch box at a military surplus store. It was a small treasure chest, including a Ledex (rotary relay) and other cool stuff. It had a painted acrylic panel with engraved labels, which were illuminated by very interesting bulbs.

These bulbs were an opaque thin disk on the surface of the panel (no light visible), with the clear part of the bulb located within the panel thickness, and a threaded base to screw into a socket. There's a picture below. The effect was to edge-light the painted acrylic panel, so the labels were visible. I've never seen bulbs like this otherwise.

Have you seen anything similar today, possibly in an LED format? Something like this would be extremely handy to edge-light a laser-engraved piece of acrylic.

edge-lit bulb.jpg
 
As I've said, my question was about a specific odd lamp. I know how to edge-light a panel from the edge using LEDs and I've done so.

You may quibble about the term "edge lit" regarding this odd bulb, but I used the term to illustrate the principle. And just for the record, a hole does have an edge, and it's the exact same principle of internal reflections that makes it work.

It appears this type of bulb was for a very specialized application, and is no longer commonly available if it ever was. Question answered. Thank you.
 

New Articles From Microcontroller Tips

Back
Top