Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Help with DIY guitar pedal

Scornn

New Member
Not having too much luck with this pedal I bought as a project. I am able to get power and bypass but no actual signal when its switched ON. I did take it to a shop to have it looked at and had a resistor replaced and things cleaned up a bit (thats what got the bypass working) but still not working as intended.

This is the data sheet I followed: https://www.diyguitarpedals.com.au/shop/boms/Lich King Chorus.pdf
 

Attachments

  • output 2.jpg
    output 2.jpg
    209.1 KB · Views: 139
  • output1.jpg
    output1.jpg
    164.2 KB · Views: 129
  • switch - Copy.jpg
    switch - Copy.jpg
    147.7 KB · Views: 134
  • back - Copy.jpg
    back - Copy.jpg
    161.2 KB · Views: 136
  • front - Copy.jpg
    front - Copy.jpg
    189.8 KB · Views: 142
Next to PLL leads, CD4046, looks like a soldering mess shorting pins ?

Overall soldering looks poor, do you have a schematic ? A oscilloscope ?
A ohmmeter ?

Looks like VR3 pot got damaged by soldering iron....

Regards, Dana.
 
Next to PLL leads, CD4046, looks like a soldering mess shorting pins ?

Overall soldering looks poor, do you have a schematic ? A oscilloscope ?
A ohmmeter ?

Looks like VR3 pot got damaged by soldering iron....

Regards, Dana.
The IC itself on the bottom or top?

Yeah unfortunately it will, I havent been doing this for too long. I do have a schematic to follow in the link provided and I do have a multimetre.

It still works as I can hear the clock speed changed when I change the value
 

Latest threads

New Articles From Microcontroller Tips

Back
Top