I've been doing some searching and I can't seem to find simple female to female connectors so I can hook up the touch screen (32pins 2x16) I just got. I would like to avoid using ribbon cables if possible since the connections always get confusing to me. I rather take it directly from the touch screen PCB and onto the bread board to ensure I have everything right and for quicker troubleshooting.
Basically, I am taking about something like this:
https://www.sparkfun.com/products/8430
Except I am just interested in the connector, so I can use my own jumper cables that I strip myself. So, does something like the end connector found on that jumper cable exist? If so, what is the exact name of this connector so I can get it on digikey if possible. Thank you so much for your time and I look forward to hearing from you guys.
Side note: I'm going to be using a PIC32 in TQFP package (only package that they sell 80MHz uCs with enough pins) with a breadboard adapter. I can't wait to start my next project!
Basically, I am taking about something like this:
https://www.sparkfun.com/products/8430
Except I am just interested in the connector, so I can use my own jumper cables that I strip myself. So, does something like the end connector found on that jumper cable exist? If so, what is the exact name of this connector so I can get it on digikey if possible. Thank you so much for your time and I look forward to hearing from you guys.
Side note: I'm going to be using a PIC32 in TQFP package (only package that they sell 80MHz uCs with enough pins) with a breadboard adapter. I can't wait to start my next project!
Last edited: