Izerous
New Member
My goal is to emulate a physical switch being pressed in a vehicle when it is first started but not again until turned off and on again. My thoughts are to have a timer controlling a relay wired in parallel with the physical momentary switch.
-When the 12v source is turned on it should wait x seconds
-after x seconds trigger a relay to emulate someone pressing the button.
-keep relay in on position for 3 seconds
-then turn off and not fire again until the circuitry looses power and re-energized again.
-When the 12v source is turned on it should wait x seconds
-after x seconds trigger a relay to emulate someone pressing the button.
-keep relay in on position for 3 seconds
-then turn off and not fire again until the circuitry looses power and re-energized again.