data sheet needed boss

[shivanaga]

please send data sheat of sl100 ..........................

 

[ericgibbs]

please send data sheat of sl100 ..........................

Have you Googled for this datasheet?

Look here:
**broken link removed**

 

[Papabravo]

please send data sheat of sl100 ..........................

What is it?
Does the number of dots indicate something?

 

[hotwaterwizard]

Here you go

 

[audioguru]

What is it?

They are ancient Asian transistors in an old metal case.

 

[Papabravo]

They are ancient Asian transistors in an old metal case.

I know you know. I was curious if the OP knew. I'm still curious about all the dots.

 

[audioguru]

Maybe the OP is an ancient asian just like the old transistor.
Maybe he is fixing an electronic product that is about 50 years old.

 

[hotwaterwizard]

So did you see the Datasheets?

 

[hotwaterwizard]

Here is SL100

 

[Krumlink]

Are those from your datasheet database?

 

[hotwaterwizard]

I have a 14,520 Datasheets in my files.

 

[hotwaterwizard]

Is this diagram correct for the Rusty Nail Project on your Brand New Website?

 

[blueroomelectronics]

Krumlinks site appears to be down.

 

[audioguru]

Is this diagram correct for the Rusty Nail Project on your Brand New Website?

No, the capacitor in the schematic has the wrong value. The pic is correct.

 

[Krumlink]

I used a 0.1 cap in one of them, and it works fine, but lower voltage to the LED. I found a 3300pf cap laying around, so I used it. Anything around 2700pf will work fine.

 

[Krumlink]

Nope, my site is working

 

[audioguru]

I used a 0.1 cap in one of them, and it works fine, but lower voltage to the LED. I found a 3300pf cap laying around, so I used it. Anything around 2700pf will work fine.

An LED has nearly a fixed voltage. Its current determines its brightness.

A capacitor with a value much too high lets the oscillator run at a lower frequency where the inductor doesn't work well and the circuit wastes battery current.

 

[Krumlink]

well if you build that one you will notice better performance, things are always going to be different if you actually build it.

 

[mneary]

Krumlink: Your site at **broken link removed** is not working.

You might be interested in an alternative site which looks a lot like yours, at **broken link removed** .

Normally it's a bad idea to point to a specific server; best to let the hosting company decide.

 

[hotwaterwizard]

I signed up.
**broken link removed**