Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
i have a circuit board with about 6 of these on it
i suspect 2 is bad
can i replace these with something else or by pass them
the number on them is 104m5e
all but 2 show 13.00 when read with ohm meter in the 20k position
the 2 suspects show nothing
thanks
Capacitors should read open circuit when measured with an ohm meter unless of course there are resistors connected in paralell with them; did you check for these?
I would suggest it's VERY unlikely the capacitors are faulty, more likely the reading is through other parts of the circuit - also, 104 is 0.1uF, and not 1uF.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
