I have a small bench top milling machine. The motor ID is (ZYT-150 150W 1.8A 4000 RPM) I can't find this motor anywhere to replace it. Anyone have any ideas where to find or maybe another solution. I have sent out many inquires with no responses. Thank you.
<h1>H8178 Power Feed for M1110/M1111</h1> <h2>Power feed table movements improve milling efficiency.</h2> <p>The H8178 Power Feed provides precision powered longitudinal table movement for the M1110, M1111, G0463, G0619, and G0720R Mill/Drills. <p>The speed range is 0–1100 mm/min and the rapid...
I suspect your milling machine might be a rebadged Seig X1. If so then you might find it listed as a "Seig X1 motor" Here is a link to an exploded view of the Seig X1. The link to the exploded view is at the top right hand corner of the page. The company stocks the 240 volt version of the motor but you want the 120 volt version.