xbee and atmega 16

S

shobhan03

New Member

• Feb 4, 2011

• #1

hi all,
i want some guidance in interfacing xbee module with atmega 16. can you post some links or anything which may direct me upon learning on how to do that?
thanks in advance

 

Sceadwian

Banned

• Feb 4, 2011

• #2

Read the PDF for the Xbee module, read the PDF for the atmega16 MCU.... Make them communicate. You have all the information you need you just have to utilize it.

 

S

shobhan03

New Member

• Feb 5, 2011

• #3

ok , fine, i will see both the datasheets..

 

ikalogic

Member

• Feb 5, 2011

• #4

connect the uart TX of the ATMEGA to pin 3 of the XBEE. Use 9600 baud rate, no parity, 8 bit.

and you should get the data from PIN 2 of the receiver XBEE.

 

blueroomelectronics

Well-Known Member

• Feb 5, 2011

• #5

Make sure everything is running at 3.3V, the XBee is not 5V tolerant.