/*
* Set the port you want to use for four bit Lcd
* Test configuration:
MCU: PIC16Fxxx //set for your chip
Oscillator: xxxx MHz //set for your Oscillator
Ext. Modules: LCD 2x16
SW: mikroC v6.0
* NOTES:
None. // this is a redid of microC test code just removed what would mess you up
*/
char *text = "Your text here";
void main() {
LCD_Init(&PORTD); // Initialize LCD connected to PORTB
LCD_Cmd(LCD_CLEAR); // Clear display
LCD_Cmd(LCD_CURSOR_OFF); // Turn cursor off
LCD_Out(1,1, text); // Print text to LCD, 2nd row, 1st column
Delay_ms(1000);
LCD_Out(2,6,"TextHereTo");
}//~!