killivolt
Well-Known Member
Wiring a typical Microphone XLR to a TRS. I plan on using this in a guitar input on a Guitar Amplifier.
XLR = (pin 1 is earth ground) (pin 2 + Positive) (pin 3 - Negative)
TRS = ( tip + positive ) ( ring - Negative ) ( Sleeve Earth Ground )
Do you think it will be OK in the Guitar input this way.
kv
XLR = (pin 1 is earth ground) (pin 2 + Positive) (pin 3 - Negative)
TRS = ( tip + positive ) ( ring - Negative ) ( Sleeve Earth Ground )
Do you think it will be OK in the Guitar input this way.
kv