nicholastyc
New Member
Problems as below:
I found this warning and unable to program my PIC using MPLAB ICD2 ,
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x1283, Val Read = 0x3FFF)
ICDWarn0044: Target has an invalid calibration memory value (0x3FFF). Continue? ( i already programmed 1 of my same pic (succeeded), this is the 2nd 1, what's wrong with it?)
What is it about?
Thanks...
Code:
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
Target Device PIC12F629 found, revision = Rev 0x10
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
Erasing Target Device...
...Erase Succeeded
MPLAB ICD 2 Ready
Programming Target...
...Validating configuration fields
...Erasing Part
...Programming Program Memory (0x0 - 0xB2)
Verifying...
...Program Memory
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x1283, Val Read = 0x3FFF)
ICD0275: Programming failed.
MPLAB ICD 2 Ready
Code:
ICDWarn0044: Target has an invalid calibration memory value (0x3FFF). Continue?
I found this warning and unable to program my PIC using MPLAB ICD2 ,
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x1283, Val Read = 0x3FFF)
ICDWarn0044: Target has an invalid calibration memory value (0x3FFF). Continue? ( i already programmed 1 of my same pic (succeeded), this is the 2nd 1, what's wrong with it?)
What is it about?
Thanks...
Last edited: