Voltage regulator external components

[camerart]

Hi,
I'm just about to make circuits using MCP1702T surface mount 3.3v regulators.
Do I need any other external components for it, or will it be ok on it's own?

EDIT: I've found the answer! They need a 1uF ceramic capacitors from each power pin to GND.

Camerart.

 

[JimB]

Have a look at the datasheet:

https://www.farnell.com/datasheets/1268701.pdf?_ga=1.146372660.1435514829.1469721226

Particularly the Typical Applications Circuit on page 2, and the Pin Descriptions on page 11.

JimB

 

[camerart]

Have a look at the datasheet:

https://www.farnell.com/datasheets/1268701.pdf?_ga=1.146372660.1435514829.1469721226

Particularly the Typical Applications Circuit on page 2, and the Pin Descriptions on page 11.

JimB

Hi J,
I'll order the capacitors, thanks.
C.

 

[crutschow]

What's the input voltage and output current?
You need to be concerned about the power it will dissipate and whether it needs any heat sink.

 

[camerart]

What's the input voltage and output current?
You need to be concerned about the power it will dissipate and whether it needs any heat sink.

Hi C,
Input voltage max 13.5 normal appr 5-8V
Output current approx 200mW.
C.