Hi electrojit, thanks for the feedback - let me attempt some answers
1) Can add shortcut, must first find out how to do it with INNO
2) Will add a close button on next version
3) I am investigating this document link thing but do not want to make the program (file) one big monolith - easier for me to handle in current form.
The other things is a bit more involved to comment on:
1) The lcd driver, which is called by the macro code, is the one you probably will edit- but there is a bit more to it and is something we can discuss later on
2) The pc is using the UART, USB is still byond me and the SPI is a bit down on my wanted list. The I2C works well (there is a application note on I2C in
the DOCUMENTATION directory.
3) There is a facility to add your own function blocks (documentation in progress) but they will not appear in the "Add block..." menu, you must supply the
source code.
4) I see no reason why you cannot use any of the macros in your RTOS, just remember my task manager is cooperative-based and you will have to look at
the code carefully. Also note the floating point format i use. For the PID specifically i use 2 variables for Manual mode control via a gui. Why not give it a
try!
Regards