using printf for two usart in stm32

#ifdef __GNUC__
/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
   set to 'Yes') calls __io_putchar() */
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#define GETCHAR_PROTOTYPE int __io_getchar(void)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#define GETCHAR_PROTOTYPE int fgetc(FILE *f)
#endif /* __GNUC__ */

PUTCHAR_PROTOTYPE
    {
    HAL_UART_Transmit(&huart1,(uint8_t*)&ch,1,100);
        
        return ch;
        
    }

PUTCHAR_PROTOTYPE 
      { 
      if(SERIAL == 1)  HAL_UART_Transmit(&huart1,(uint8_t*)&ch,1,100);   
      if(SERIAL == 2)  HAL_UART_Transmit(&huart2,(uint8_t*)&ch,1,100);          
      return ch;         
      }

void Serial_Write(char port, unsigned char value)
{
    if (port==1)
    {
        EUSART1_Write(value);
    }   
    else if (port==2)
    {
        EUSART2_Write(value);
    }     
}