Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Unbrick a Wiznet w5100 ethernet shield

Status
Not open for further replies.
dr pepper

dr pepper

Well-Known Member
Most Helpful Member
I have a W5100 shield that I appear to have bricked.
I compiled and ran some code for a Enc28J60, and then ran it on a W5100, which appears to have bricked the latter, it no longer runs any of the ethernet examples, and doesnt reply to a ping.
Is there a sketch that does a factory reset or something?
 
Status
Not open for further replies.

Similar threads

D
Low voltage problem with Arduino MKR CAN shield
Replies
0
Views
4K
Diver300
D
J
  • Question
Controlling a Stepper Motor with Arduino
Replies
3
Views
2K
atferrari
atferrari
mariaclara
cnc shield but make it with Esp32
Replies
2
Views
6K
mariaclara
mariaclara
P
Trying to setup a 125uS interrupt.
Replies
1
Views
4K
rjenkinsgb
rjenkinsgb
Fintek
  • Question
Why does "blink" show as a command?
Replies
5
Views
6K
Pommie
P

Latest threads

New Articles From Microcontroller Tips

Back
Top