dr pepper Well-Known Member Most Helpful Member Apr 18, 2016 #1 Anyone know if you can get maxims umax to dil adaptors so I can get a 8 pin umax device on breadboard?
Anyone know if you can get maxims umax to dil adaptors so I can get a 8 pin umax device on breadboard?
Tony Stewart Well-Known Member Most Helpful Member Apr 19, 2016 #2 8-Pin SO/uMAX to Dip 8 https://www.proto-advantage.com/store/product_info.php?products_id=2200026 Apply solder paste and use mini-toaster oven or other method, to match recommended solder profile use a thermocouple.
8-Pin SO/uMAX to Dip 8 https://www.proto-advantage.com/store/product_info.php?products_id=2200026 Apply solder paste and use mini-toaster oven or other method, to match recommended solder profile use a thermocouple.
Tony Stewart Well-Known Member Most Helpful Member Apr 19, 2016 #3 Alternatively buy an extra chip and place on DIP socket with a hot glue dot then insert resistors into socket , cut bend and solder leads to chip. ( not to scale) Or similar method.... Custom sockets for ATE are expensive. This way is cheap.
Alternatively buy an extra chip and place on DIP socket with a hot glue dot then insert resistors into socket , cut bend and solder leads to chip. ( not to scale) Or similar method.... Custom sockets for ATE are expensive. This way is cheap.
C canadaelk Active Member Apr 19, 2016 #4 TI: DIP-ADAPTER-EVM available from Digikey as # 296-35646-ND
dr pepper Well-Known Member Most Helpful Member Apr 19, 2016 #5 I'm doing a digikey, I'll look for that thanks.
granddad Well-Known Member Most Helpful Member Apr 19, 2016 #6 doc These are cheap and fast and OK parts. https://www.hobbytronics.co.uk/prototyping/smd-adapter-boards
doc These are cheap and fast and OK parts. https://www.hobbytronics.co.uk/prototyping/smd-adapter-boards
S spec Well-Known Member Most Helpful Member Apr 19, 2016 #7 The post has been answered now but, just for reference, here is the land pattern for the uMax case: https://pdfserv.maximintegrated.com/land_patterns/90-0092.PDF spec (nice recommendation grand ) Last edited: Apr 19, 2016
The post has been answered now but, just for reference, here is the land pattern for the uMax case: https://pdfserv.maximintegrated.com/land_patterns/90-0092.PDF spec (nice recommendation grand )
dr pepper Well-Known Member Most Helpful Member Apr 19, 2016 #8 Thanks gramps I'll remember them, havent dealt with ht for a while.