Either I have a bunch of bad 2003 and 2803 chips or I am doing something wrong in trying to get them to work. I tied pin 8 of the 2003 (pin 9 of 2803) to gnd, pin 9 (pin 10 of 2803) to +5v and I grounded pin 1 which is the first input. I should get a high out on pin 14 (16 on the 2803), but I don't. I get almost the same as the input about .05vdc. Am I doing something wrong? I am using the ground and +5v from an arduino. It should work as it can turn a relay on and off, but I cannot get the 2003 to work. I guess I just have some bad chips, but I thought I would check and see if there is anything else I need to do get this to work.
