Trying to identify a switch - any ideas?

• The "custom" part numbers stamped on the switches are "26-2205-4" and "G10-4"...
• The case has a molded in "C-H" logo (Cutler Hammer, I think?) and the "V-code" 81640 (which shows as Safran)...

Dennis C PGA said:

Hello all. I am trying to identify a snap-action switch that I need to replace, and I was hoping someone on here might be able to help. I am attaching pictures of a custom switch that I need to replace that has a specialized plunger on it. I know I won't be able to find the custom switch, but I am hoping to find the generic version and then either transfer over my plunger or have a replacement fabricated. I am attaching pictures of the switch in question to this post, and I am listing what I know of the switch below. I remember working with an off-the-shelf version years back, but I don't remember the part number. Any help you can provide would be greatly appreciated. It is my hope that if someone knows who makes this and what series the generic version of the switch is, I will be able to track down a manufacturer's datasheet and find my replacement. Thanks!!!

What I know about it:

• The "custom" part numbers stamped on the switches are "26-2205-4" and "G10-4"...
• The case has a molded in "C-H" logo (Cutler Hammer, I think?) and the "V-code" 81640 (which shows as Safran)...

Or if anyone could point me in the direction of someone who might know, that would be appreciated as well.

Click to expand...