using an lm741 i am able to generate a square wave. If the input to my second lm741 IC is a square wave the capacitor and grounded resistor in the second IC should turn the square wave into a triangle wave. by connecting a capacitor between the inverting input and the output and grounding the noninverting input I should be able to ramp down the output.which should make a triangle wave.. instead I get a wave form that looks like a square wave with a roof on it, it looks like a house on the oscilloscope, thats the best way to describe it, its a mix between a triangle wave and a square wave not what im aiming for. no matter what the R & C are i still get this bizzare looking waveshape