Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Toner transfer, Laminator single pass mod!

Status
Not open for further replies.

Mosaic

Well-Known Member
I thought I'd give this it's own thread so as to make it easier to find.
Thanks to KeepItSimpleStupid for his advice and throbscottle for his inspiration.

Here's the Hackaday link to the complete project & all design files...

https://hackaday.io/project/3363-apache-al13p-laminator-one-pass-pcb-toner-xfer

Now I can have a reliable PCB in the etchant in under 5 minutes!

Edit: I use baking parchment paper, wiped with 90%+ isopropyl alcohol on the printing side before printing. Stick the parchment onto regular paper as a non-jamming approach to printing.

Edit2: Hackaday featured the project in their own postings!
https://hackaday.com/2014/11/21/upgrading-a-laminator-for-toner-transfer-pcbs/
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top