RadioRon said:Can the bulletin board software be modified to specifically ask for a schematic diagram for any new thread?
RadioRon said:Many novices don't seem to get it. In electronics we speak a different language, and they need to learn it. That language is the SCHEMATIC DIAGRAM. We see so many many many posts where people begin with something like "I'll try to describe this circuit as accurately as possible..." when all that is required is an accurate schematic diagram. So elegant, so easily understood, so useful, so to-the-point. ( Sigh) I wish there were more we could do to encourage inclusion of a schematic in posts. Can the bulletin board software be modified to specifically ask for a schematic diagram for any new thread?
o----o-----------o
| | | Phasenverschiebung = 0°
| .-. .-.
| R1| | RC| |
| | | | | C2 rBE
| '-' '-' re= --- || RE
| | | || ß
--- | o------||----------o
- | | ||
| | |/
| o-----o---| UA
| | | |>
| | | | ||
| | | o------||-----o
| | | | ||
| .-. | .-.
| R2| |CB --- RE| | C1
| | | --- | | UE
| '-' | '-'
| | | |
o----o-----o-----o-------------o----o
(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
.---o----o------o---o---------------o---o----o------------o12-15V
| | | 22uF|+ | | | |
.-. | .-. === | .-. | | .-------o
| |<-' | | /-\ | | | | | | .---o
| |5k | |5k6 | | | | | |\ | |
'-' '-' | o--. '-' | _ o o o /o
| | === | | | | )| /
.-. | GND | ---100n LED V - )| /
| | | | --- - ^ _)| o
| |6k2 | | | | | | |
'-' | | GND '---o----o '-------o
| | 2|\|7 |
o-----------------|-\ LM741 ___ |/
| | | >-------o--|___|--o---|
| o---o----|+/ 6 | 22k | |> BC547
| | | 3|/|4 | | |
.-. | | === o---. .-. |
| | | o---. GND | | | |5k6 |
| |2k7 .-. | | ___ _V_ | | | |
'-' KTY10 |+ '--|___|--|___|-' '-' |
| | | === 47k 220k | |
| '-' /-\ | |
| | | | |
| | | | |
'--------o---o-------------------------o-----o------------o GND
(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
Argh...those can always be so hard to read. I'd say ExpressPCB or Eagle will do fine; if people are serious enough about electronics they'll install it.Pommie said:Maybe people could use **broken link removed** to draw schematics and insert them like this,
Code:o----o-----------o | | | Phasenverschiebung = 0° | .-. .-. | R1| | RC| | | | | | | C2 rBE | '-' '-' re= --- || RE | | | || ß --- | o------||----------o - | | || | | |/ | o-----o---| UA | | | |> | | | | || | | | o------||-----o | | | | || | .-. | .-. | R2| |CB --- RE| | C1 | | | --- | | UE | '-' | '-' | | | | o----o-----o-----o-------------o----o (created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
or,
Mike.Code:.---o----o------o---o---------------o---o----o------------o12-15V | | | 22uF|+ | | | | .-. | .-. === | .-. | | .-------o | |<-' | | /-\ | | | | | | .---o | |5k | |5k6 | | | | | |\ | | '-' '-' | o--. '-' | _ o o o /o | | === | | | | )| / .-. | GND | ---100n LED V - )| / | | | | --- - ^ _)| o | |6k2 | | | | | | | '-' | | GND '---o----o '-------o | | 2|\|7 | o-----------------|-\ LM741 ___ |/ | | | >-------o--|___|--o---| | o---o----|+/ 6 | 22k | |> BC547 | | | 3|/|4 | | | .-. | | === o---. .-. | | | | o---. GND | | | |5k6 | | |2k7 .-. | | ___ _V_ | | | | '-' KTY10 |+ '--|___|--|___|-' '-' | | | | === 47k 220k | | | '-' /-\ | | | | | | | | | | | | '--------o---o-------------------------o-----o------------o GND (created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
audioguru said:People who post schematics as a very fuzzy JPG file type should be hanged or shot.
audioguru said:People who post schematics as a very fuzzy JPG file type should be hanged or shot.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?